Replacing Your Bug Zapper Globe
Please scroll down to locate your bug zapper by brand Zap Zone Defender Device name and model sort and observe our instructions on the way to substitute your bug zapper globe. At no time are you ever to take away the hood or cage of the bug zapper to exchange the globe. This will then enable access to live elements and void warranty. Which is your Bug Zapper? Click the hyperlinks under to seek out the directions for that individual bug zapper. 1. Unplug your Bug Vac and patio insect zapper take away from its mounting place. 2. Resting your Bug Vac on a gradual floor bug zapper take away the water draw from the trap. 3. Remove the lens by locating the hole at the base of the lens in the centre, use your fore finger and thumb to squeeze the empty drawer holder together and carefully slide a skinny metallic object. 4. Gently angle the object behind the lens to lift the centre and Zap Zone Defender launch the left tab by sliding the lens to the right.
Repeat by sliding the lens to the left to launch the fitting tab. 5. Twist the globe to open the lamp holder to remove the lamp. 7. Twist the new globe into place to close the lamp holder. 8. Replace the lens by inserting the left tab into its corresponding hole and repeat with the appropriate tab. 9. Secure the lens by pushing it downwards, you'll feel it click on into place. 10. Replace the drawer stuffed with water and Zap Zone Defender Device a number of other drops of detergent. 11. Plug your bug zapper into the power socket and the globe should gentle up. Following steps 1-5 check the globe is safe within the lamp holder and exchange plastic cowl. Use genuine yard guard substitute lamps in your bug zapper. In case you have followed these steps and your zapper still won’t light up, please contact us. 2. Holding your bug zapper, flip it the other way up so the hood is dealing with away from you.
3. Access the sunshine by locating the lever in the centre of the bug zapper and pull along with your finger in the direction of you. 4. The bulb cover will open and you'll be capable of entry the alternative globe. 5. Gently pull on the globe to take away it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and safe by again pulling the lever towards you and then releasing as soon as the cover has closed securely. 9. Plug your bug zapper into the power socket and Zap Zone Defender Device the globe should gentle up. Following steps 1-four test the globe is safe in the lamp holder and chemical-free bug control exchange plastic cowl. When you've got followed these steps and your zapper nonetheless won’t light up, please contact us. 2. Holding your bug zapper, flip it the other way up so the hood is facing away from you. 3. Access the light by locating the lever in the centre of the bug zapper and pull along with your finger in the direction of you.
4. The bulb cowl will open and you will have the ability to access the replacement globe. 5. Gently pull at the globe to take away it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and secure by again pulling the lever in direction of you and then releasing once the cover has closed securely. 9. Plug your bug zapper into the ability socket and the globe should gentle up. Following steps 1-4 test the globe is safe in the lamp holder and substitute plastic cover. If in case you have followed these steps and your zapper still won’t gentle up, please contact us. 2. Holding your bug zapper, flip it the wrong way up so the hood is facing away from you. 3. Using a phillips head screwdriver remove the 2-three screws situated on the underside of the bug zapper. 4. Remove the plastic cover sealing the bug zapper globe in place.